Larry Pattis
2009-09-30 22:41:55 UTC
I have this nifty/powerful little G-K amp that I don't use...someone
should buy it from me.
It's got a 7-band EQ, 3-channels (one xlr, one 1/4", one Aux),
additional Aux EQ controls, reverb, etc.
It's a handy yet powerful amp (as I mentioned), comes with a
floor-stand, and also a carry-bag with zippered pocket and
shoulder-strap.
I think $475 including ground-shipping in the ConUS. Canada would add
$25.
Anyone interested??
Email me as per the email address below...I can send the manual as a
pdf, if you want to look it over.
Specifications
Power @ 400Hz
100 Watts into 4 Ohms @ .1 THD
72 Watts into 8 Ohms @ .1% THD
Signal - to - noise Ratio :>80dB
Max Distortion :.35%
Frequency Response :Less than ± 1dB 20- 20K Hz
Line out :+ 1.6dBV (Nom)
Direct Outs - into 1K OHM Balanced input
CH. 1 = CH. 1 input Level
CH. 2 (Switch Out) = CH. 2 Input Level - 6dB
CH. 1 & 2 Post Effects (Switch In) - 20dBV (Nom)
Auxiliary Output :Equal to AUX. In 1 & 2 Levels
Channel 1 Input
Input Impedance - 5.6K OHM
Max input Level - 95mV RMS
W/-10dB Switch in - 300mV
Input Sensitivity - 2.4mV
Channel 2 Input
Input Impedance - 1M OHM
Max input level - 2.4V RMS
Input Sensitivity - 30mV
Auxiliary Input
Input Impedance - 1M OHM
Max input Level - .9V RMS
Input Sensitivity - 8mV
should buy it from me.
It's got a 7-band EQ, 3-channels (one xlr, one 1/4", one Aux),
additional Aux EQ controls, reverb, etc.
It's a handy yet powerful amp (as I mentioned), comes with a
floor-stand, and also a carry-bag with zippered pocket and
shoulder-strap.
I think $475 including ground-shipping in the ConUS. Canada would add
$25.
Anyone interested??
Email me as per the email address below...I can send the manual as a
pdf, if you want to look it over.
Specifications
Power @ 400Hz
100 Watts into 4 Ohms @ .1 THD
72 Watts into 8 Ohms @ .1% THD
Signal - to - noise Ratio :>80dB
Max Distortion :.35%
Frequency Response :Less than ± 1dB 20- 20K Hz
Line out :+ 1.6dBV (Nom)
Direct Outs - into 1K OHM Balanced input
CH. 1 = CH. 1 input Level
CH. 2 (Switch Out) = CH. 2 Input Level - 6dB
CH. 1 & 2 Post Effects (Switch In) - 20dBV (Nom)
Auxiliary Output :Equal to AUX. In 1 & 2 Levels
Channel 1 Input
Input Impedance - 5.6K OHM
Max input Level - 95mV RMS
W/-10dB Switch in - 300mV
Input Sensitivity - 2.4mV
Channel 2 Input
Input Impedance - 1M OHM
Max input level - 2.4V RMS
Input Sensitivity - 30mV
Auxiliary Input
Input Impedance - 1M OHM
Max input Level - .9V RMS
Input Sensitivity - 8mV
--
Larry Pattis
email: LP "at" LarryPattis "dot" com
http://www.LarryPattis.com
Larry Pattis
email: LP "at" LarryPattis "dot" com
http://www.LarryPattis.com