Seattle Guitar Tech Recommendations?

[w***@gmail.com]

Hi Folks,

I lurked and posted here occasionally more than a decade ago. It's good to see some familiar names as well as new ones. I moved from the SF Bay Area to a place 60 miles north of Seattle. Looking for a guitar tech who could install a Seymour Duncan Mag-Mic into a Martin 000-15. I'll likely want the jack in the end pin, if that works.

My D-15 was set up that way and it worked fine. If anyone has recommendations on Seattle Area guitar techs or opinions about installing the jack in the end pin I'd appreciate your thoughts.

Thanks for any help.

Warren

[Bill Brewer]

Experts, and a prominent guitar shop. Official Martin warranty service:

http://store.dustystrings.com/t-1-repairs.aspx

<***@gmail.com> wrote in message news:e782264c-e34a-4cd4-ad03-***@googlegroups.com...
Hi Folks,

I lurked and posted here occasionally more than a decade ago. It's good to
see some familiar names as well as new ones. I moved from the SF Bay Area
to a place 60 miles north of Seattle. Looking for a guitar tech who could
install a Seymour Duncan Mag-Mic into a Martin 000-15. I'll likely want the
jack in the end pin, if that works.

My D-15 was set up that way and it worked fine. If anyone has
recommendations on Seattle Area guitar techs or opinions about installing
the jack in the end pin I'd appreciate your thoughts.

Thanks for any help.

Warren

[rayboyce]

Nothing more prominent nor consistent than Mike Lull's guitar works. Not an
inexpensive investment, but yield is as good as it gets, anywhere.



<***@gmail.com> wrote in message news:e782264c-e34a-4cd4-ad03-***@googlegroups.com...
Hi Folks,

I lurked and posted here occasionally more than a decade ago. It's good to
see some familiar names as well as new ones. I moved from the SF Bay Area
to a place 60 miles north of Seattle. Looking for a guitar tech who could
install a Seymour Duncan Mag-Mic into a Martin 000-15. I'll likely want the
jack in the end pin, if that works.

My D-15 was set up that way and it worked fine. If anyone has
recommendations on Seattle Area guitar techs or opinions about installing
the jack in the end pin I'd appreciate your thoughts.

Thanks for any help.

Warren